|
SCC3 Solar Charge Controller kit
|
12 Volt, 20 Amp charge controller that is installed between a solar
panel and a battery for charge regulation. The SCC3 is designed for
cabin-sized solar power systems, stand-alone solar devices, portable and
automotive/marine solar power systems.
|
|
SPC3 Solar Power Center kit
|
12 Volt, 9 Amp solar charge controller with a 10 Amp manually-operated
load switch, low voltage disconnect (LVD), self-contained light source
and connection for additional lamps.
The SPC3 is designed to be the heart of a small building solar-powered
lighting system and more.
|
|
DAS1 Dark Activated Switch kit
|
12 Volt, 10 Amp dark activated load switch that
is used for automatic on-at-dark lighting systems.
Features built-in dual white LED light source, On-Off-Auto switch
and low voltage disconnect (LVD) with automatic reconnect.
Works with the SCC3.
|
|
LVD1 Low Voltage Disconnect kit
|
12 Volt, 15 Amp low voltage disconnect (LVD) circuit with auto and manual
restart.
For automatic power control of remote solar-powered devices.
Features adjustable on and off voltages, low voltage indication before
disconnect and an isolated L.V. signal for controlling other devices.
Works with the SCC3.
|
|
BVM1 Battery Voltage Monitor kit
|
12 Volt color-coded LED voltmeter with low power consumption.
For monitoring 12V solar/alternative energy power systems and
automotive/marine/RV batteries.
One of ten color-coded ultra-bright LEDs will blink to display
the battery voltage in .5 Volt steps from 10.5V to 15V.
Includes a switch-enabled beeper that warns of a low battery condition.
Works with the SCC3 and SPC3.
|
